INTUMESCENT PAINT
Today architects and contractors are looking for new ways to protect interior wood, drywall and other substrates in office buildings, health care facilities, as well as other commercial structures. Krytiuk Specialty Contracting Inc. has applied intumescent paint to a great variety of project, from structural steel members / beams (exposed and non) to open web steel joist, load bearing columns, to the interior of office buildings and private residences. The intumescent paint will give up to a 3 hour fire rating (depending on thickness). Intumescent paint is available in a water based, and solvent based solution, as well as a specific solvent based paint made for exterior use. Krytiuk Specialty Contracting highly recommends the use of Ston-Cor Nullfire products.
Intumescent Fireproofing Systems allow designers to express steel structures as an art form in buildings where fire resistant ratings are required. With multiple product choices and a full spectrum of primers and finish colors, specifications can be developed for all building types, project requirements and job conditions. Project planers now have flexibility to create exposed steel designs where fire resistance ratings are required with aesthetically, pleasing, durable and cost effective alternatives.
Krytiuk Specialty Contracting Inc. supplies and applies the following four types of intumescent paint;
S FILLER
A single pack, high build filler based on thermoplastic acrylic resin and hydrocarbon solvent for the repair of damaged areas.
• High Build - thickness of up to 120 mils can be applied in one application.
• Decorative Finish can be abraded back to a smooth surface to match the surrounding intumescent basecoat.
• Easy to use - no mixing required.
SYSTEM S MSDS
SYSTEM S FILLER PRODUCT DATA SHEET
S605
A single pack, solvent-based intumescent coating for fire protection on structural steel. S605 basecoat is designed to fireproof the interior and exterior steelwork for up to 2 hours fire rating, depending on design. The recommended use for this product is fireproofing steel beams, columns, tubes and pipes.
Features;
• U.L.I. Listed - design for many sections, to provide up to a 2 hour fire rating.
• Decorative finish - gives a smooth decorative finish. Compatible top coats available in a wide range of colors.
• Durable finish - Provides a hard dust free surface resistant to normal wear.
• UL Exterior rating - can be permanently exposed to weather with the approved topcoat.
• UL 1709 Rated for 2 hours.
• Thin film coating - Offers an economical solution to traditional fireproofing.
• VOC compliant
• Easy repair - If damaged it can be easily repaired with S Filler
• Typical Dry Film Thickness range between 30-340 mils
S605 MSDS
S605 PRODUCT DATA SHEET
S605 APPLICATION INSTRUCTIONS
S606
A single pack, solvent-based intumescent coating for fire protection on structural steel. S606 basecoat is designed to fireproof steelwork for up to 3 hours fire rating, depending on the design. The recommended use for this product is fireproofing steel beams, columns, tubes and pipes.
Features;
• U.L.I. Listed - design for many sections, to provide up to a 3 hour fire rating for both interior ratings: (1) General or (2) conditioned space purposes
• Decorative finish - gives a smooth decorative finish. Compatible top coats available in a wide range of colors.
• Durable finish - Provides a hard dust free surface resistant to normal wear.
• Thin film coating - Offers an economical solution to traditional fireproofing.
• VOC compliant
• Easy repair - If damaged it can be easily repaired with S Filler
• Typical Dry Film Thickness is between 20-292 mils
S606 MSDS
S606 PRODUCT DATA SHEET
S606 APPLICATION INSTRUCTIONS
S607
A waterborne, intumescent basecoat for fire protection on structural steel. S607 basecoat is designed to fireproof interior steelwork for up to 2 hours fire rating, depending on the design. The recommended use for this product is fireproofing steel beams, columns, tubes and pipes.
Features;
• U.L.I. Listed - design for many sections, to provide up to a 2 hour fire rating for both interior ratings: (1) General or (2) conditioned space purposes
• Decorative finish - gives a smooth decorative finish. Compatible top coats available in a wide range of colors.
• Durable finish - Provides a hard dust free surface resistant to normal wear.
• Waterborne - can be used in occupied buildings where solvent fumes may be a problem
• Spray Application - applied by airless spray either on site or off site (with suitable top coat) prior to erection of the steelwork
• VOC compliant
• Easy repair - If damaged it can be easily repaired with S Filler
• Typical Dry Film Thickness is between 20-292 mils
S607 MSDS
S607 PRODUCT DATA SHEET
S607 APPLICATION INSTRUCTIONS
SYSTEM E
A two pack, solvent free epoxy intumescent for fire protection of structural steel, up to 3 hours hydrocarbon rating. The E System is designed to protect structural steel, bulkheads in a hydrocarbon fire situation. It can also be used to protect valves, actuators, containers and pre-assembled units.
• U.L.I. Classified tested to UL 1709 environmental test program. UL Design XR615.
• Independently tested and approved by various bodies, including Lloyds Register and Det Norske Veritas.
• Durable finish provides an extremely hard, damage resistant surface.
• Fast Application - can be applied up to 400 mils in one coat with airless spray.
• Can be top coated with an approved topcoat to give a decorative finish.
• Lightweight when compared to other forms of sprayed fire protection.
• Resistant to a wide range of chemicals and substances.
SYSTEM E PRODUCT DATA SHEET